Send feedback
Report an error

The range of Alfa LU-VE Arctigo ISBX industrial air coolers with one-way air flow for long-term storage of the fruits and vegetables. Cubic coolers are designed for work with natural refrigerant CO2 with cooling capacity from 4,96 kW to 290,60 kW. They are optimized for work at the air temperatures about 0°C and with the small temperature differences, it helps to prevent dehydration of the products.

They are equipped with AC fans or energy-saving EC fans with diameters from 450 mm to 1000 mm. Devices are certified by Eurovent.

The series of Alfa LU-VE Arctigo ISBX designed for storing fresh vegetables and fruits. The maximum height of the cooler is 587 mm. The large heat exchange surface increases efficiency in frosty or dirty conditions.

Air coolers can be equipped with a block fin tubes with a triangular or square geometry. The triangular geometry provides lower fin temperatures and higher capacity per m2 of the block surface, it allows to make radiator more compact. The square geometry results in a larger heat exchange surface area, which reduces air pressure drop and fan power consumption. This solution is suitable for applications requiring high relative humidity.

A wide range of optional equipment: diffuser (D), diffuser with defrost damper (DO), shut-up sock (S), air sock adapter ring (SR), streamer (ST), central junction box (CB1), body and frame made of acid-resistant steel (SSC), fin protection (EP) or made of sea water resistant aluminium (SWR), double fin space (DF), service switch (SW), steering wheel cover 45°(H1) or 90°(H2) and many others.

Arctigo ISBX coolers are equipped with suction fans, from 1 to 8 pcs, with two fan motor speeds: 400V/3~/50Hz and 230V/1~/50Hz (for diameters of 400 and 450 mm) and two sound levels (Δ/Y connection) for AC 3ph fans. EC fans can be selected according to different rotation speeds. Build-in thermal contacts provide reliable protection against thermal overload.

Air blowing through the block ensures:

  • Higher DTML value, higher cooling capacity
  • Longer air flow
  • Higher relative humidity (RH), less products drying

Configuration examples:

  • Blow-through
  • Ceiling mounted    
  • Large air throw, carrot and potato storage

  • Blow-through 
  • Floor mounted 
  • Distribution centres fresh produce

  • Blow-through 
  • Floor mounted 
  • Inlet hood 90° 
  • Large cold rooms high humidity

Arctigo ISBX characteristics:

  • Nominal capacity: from 4,96 kW to 290,60 kW (te=-8°C, ta=0°C, R744)
  • Air flow: from 3 073 m3/h to 107 828 m3/h
  • Block fin tubes:
    • Aluminium fins
    • Fin spacing: 4,0; 5,0; 6,0; 7,0; 8,0; 10,0; 12,0 mm
    • Tubing ø 5/8”Cu ripple fin or smooth stainless steel
    • Block geometry: 50 mm square or 48 mm triangular
  • Fans:
    • From 1 to 8 pcs with diameter: 450, 500, 630, 710, 800 and 1000 mm
    • Power supply: 230V/1~/50Hz; 400V/3~/50Hz
    • AC or energy-saving EC fans
    • Blowing through the block
  • Maximum operation pressure : 30-66 bar
  • Temperature range in chamber: from -40°C to +30°C
  • DX expansion valve or pump supply

Arctigo ISBX advanteges:

  • Durable design of the cooler ensuring high quality of stored product
  • Block fin tubes and body adapted to work in demanding conditions, which ensures long products life
  • Low noise level in rooms where people stay
  • Infrequent defrost cycles for square block geometry
  • Natural refrigerant CO2 (GWP=1)
  • High energy efficiency
  • Easy installation
  • Hanging drip tray
  • Certified by Eurovent


Arctigo ISBX defrost systems (option):

  • Electric defrost of the drip tray (E1)
  • Electric defrost heavy (E2)
  • Electric defrost light (E4)
  • Hot gas defrost (HG, HGC – with connection to the block)
  • Hot water defrost (HW)

Due to frequent changes and updates, presented data are provided on illustrative basis only. All materials contained on this website are protected by copyright and their use, copying and publishing in any form is prohibited without the written consent of Elektronika DP Elektronika JSC. Please read the full Terms of use

Sales of equipment

We are a direct importer, an authorized distributor of the world's leading manufacturers of refrigeration equipment and components for refrigeration. The main activity is the selection and sale of equipment and components for refrigeration systems.

Check our offer

Technical support

We actively support our installers. We organize product training and technical consultations for refrigeration engineers at every stage of project implementation. Hundreds of successful investments confirm our competence and experience.

Check our offer

Own production

Based on many years of experience of our engineers in the field of design and assembly of refrigeration equipment, in 2017 we started own production. refrigeration units and multi-compressor units based on Danfoss, Frascold and Bitzer compressors.

Check our offer

Cookies information

This website uses cookies to improve the quality of the services provided. It also uses the Third-Party cookies, they provide tools and solutions that improve the ergonomics and functionality of the website, such as video playback, website usage analytics and marketing content customization.

By clicking accept, you agree to use cookies, as outlined in our Cookie Policy