Send feedback
Report an error

The range of Alfa LU-VE Arctigo IDBW glycol industrial air coolers with two-way air flow, designed for use in demanding cooling and freezing processes in medium and large cooling rooms. Flat coolers are intended for work in capacity range from 1,92 kW to 103,23 kW.

They are equipped with AC fans or energy-saving EC fans with diameters: 450, 500 to 630 mm. Alfa LU-VE Arctigo IDBX allow to maintain the temperature in the range from -35°C to +20°C, both in high and low humidity environments.

Thanks to various configurations and a number of additional options, Arctigo IDBW air coolers can be the best choice for a specific application and type of refrigerant. They can be configured for sensitive applications such as crop storage.

Air coolers can be equipped with a block fin tubes with square geometry. It provides a larger heat exchange surface area, which reduces the number of defrost, extends cooling periods, reduces air pressure drop and fans energy consumption. This solution is suitable for applications requiring high relative humidity. The large heat exchange surface increases efficiency in frosty or dirty conditions.

 

A wide range of optional equipment: central junction box (СB/CB1), body and frame made of acid-resistant steel (SSC), fin protection (EP) or made of sea water resistant aluminium (SWR), service switch (SW), connected fan frame heater (FRH), drip tray insulation (I2) and many others insure flexibility in the selection of air coolers to the requests of a specific application.

Arctigo IDBW coolers are equipped with fans, from 1 to 5 pcs, with diameters from 450 to 630 mm, and two fan motor speeds: 400V/3~/50Hz and 230V/1~/50Hz and two noise levels (Δ/Y connection). Build-in thermal contacts provide reliable protection against thermal overload.

Air blowing through the block ensures:

  • Higher DTML value, higher cooling capacity
  • Longer air flow
  • Higher relative humidity (RH), less products drying

Arctigo IDBW characteristics:

  • Nominal capacity: from 1,92 kW to 103,23 kW (ethylene glycol 35%, tj,in=-8°C, tj, out=-4°C, ta=0°C)
  • Air flow: from 4 401 m3/hto 56 312 m3/h
  • Block fin tubes:
    • Aluminium fins
    • Fin spacing: 4,0; 5,0; 6,0; 7,0; 8,0; 10,0; 12,0 mm
    • Smooth cooper tubes: Ø5/8’’ or smooth stainless steel tubes
    • Block geometry: 50 mm square
  • Fans:
    • From 1 to 5 pcs with diameters: 450, 500 and 630mm
    • Power supply: 230V/1~/50Hz; 400V/3~/50Hz
    • AC or energy-saving EC fans
    • Blowing through the block
  • Maximum operation pressure: 10 bar
  • Temperature range in chamber: from -35°C to +20°C

Arctigo IDBW advanteges:

  • Durable design of the cooler ensuring high quality of stored product
  • Block fin tubes and body adapted to work in demanding conditions, which ensures long products life
  • Low noise level
  • Infrequent defrost cycles
  • Easy installation
  • Hanging fan plate
  • AC or energy-saving EC fans

Arctigo IDBW defrost systems:

  • Electric defrost of the drip tray (E1)
  • Electric defrost heavy (E2)
  • Electric defrost light (E4)
  • Hotgas defrost - light, not connected (HG1)
  • Hotgas defrost - heavy, not connected (HG2)
  • Hotgas defrost - light, connected (HG1C)
  • Hotgas defrost - heavy, connected (HG2C)

Due to frequent changes and updates, presented data are provided on illustrative basis only. All materials contained on this website are protected by copyright and their use, copying and publishing in any form is prohibited without the written consent of Elektronika DP Elektronika JSC. Please read the full Terms of use

Sales of equipment

We are a direct importer, an authorized distributor of the world's leading manufacturers of refrigeration equipment and components for refrigeration. The main activity is the selection and sale of equipment and components for refrigeration systems.

Check our offer

Technical support

We actively support our installers. We organize product training and technical consultations for refrigeration engineers at every stage of project implementation. Hundreds of successful investments confirm our competence and experience.

Check our offer

Own production

Based on many years of experience of our engineers in the field of design and assembly of refrigeration equipment, in 2017 we started own production. refrigeration units and multi-compressor units based on Danfoss, Frascold and Bitzer compressors.

Check our offer

Cookies information

This website uses cookies to improve the quality of the services provided. It also uses the Third-Party cookies, they provide tools and solutions that improve the ergonomics and functionality of the website, such as video playback, website usage analytics and marketing content customization.

By clicking accept, you agree to use cookies, as outlined in our Cookie Policy